EMI FFT Receiver full compliance with integrated LISN EMI Receiver: ER8000 | NARDA SAFETY TEST SOLUTIONS

Extra compact, flexible and easy-to-use, ER8000 is a high performance, full CISPR 16-1-1 compliant EMI receiver perfect for any conducted and radiated measurement from 9 kHz up to 3 GHz.

The ER8000 features an internal built-in 16 A LISN, so this compact setup can perform conducted emission measurement tests quickly and effectively, whether in the design lab during product development or in an EMC laboratory.

The receiver can be ordered with two different frequency ranges: 9 kHz to 30 MHz (PMM ER8000 opt. 00), or 9 kHz to 3 GHz (PMM ER8000 opt. 01). Users can upgrade from version opt. 00 to version opt. 01 at any time.

Advantages

• Full-compliance EMI measurements according to CISPR 16-1-1
• Integrated 16 A LISN for conducted emission testing without requiring an external LISN for suitable equipment under test
• Extremely fast measurements using gapless FFT technology
• Combined EMI receiver and spectrum analyzer functionality
• High selectivity with integrated preselector and low-noise preamplifier
• Compact and rugged design for laboratory and on-site measurements
• Frequency coverage up to 3 GHz depending on the selected option
• Upgrade path from Option 00 to Option 01
• Control of external LISNs and additional measurement accessories
• PMM Emission Suite (PES) software for measurement control, analysis and reporting
• Optional discontinuous disturbance measurements with the CA0010 Click Analyzer

Key Features

• Frequency options:
  • ER8000 Option 00: 9 kHz to 30 MHz
  • ER8000 Option 01: 9 kHz to 3 GHz
• Measurement technology: gapless FFT signal processing
• Direct analog-to-digital conversion up to 30 MHz
• Integrated LISN: single-phase, 16 A, 150 kHz to 30 MHz
• LISN compliance: CISPR 16-1-2
• Maximum LISN operating voltage: 250 V AC / 350 V DC
• Standards: CISPR 16-1-1; measurements according to MIL-STD-461, ANSI C63.2 and FCC requirements
• CISPR 14-1: click measurements in combination with the CA0010
• Integrated RF preselector and switchable low-noise preamplifier
• Measurement detectors: Peak, Quasi-Peak, Average, RMS, RMS-Average and C-Average
• Smart Detector functionality above 30 MHz
• CISPR measurement bandwidths: 200 Hz, 9 kHz, 120 kHz and 1 MHz
• Maximum RF input level without damage: 140 dBµV (2 W) up to 30 MHz; 137 dBµV (1 W) above 30 MHz
• Interfaces: USB 2.0, RS-232 and User Port for external accessories
• PMM Emission Suite software for automated measurements, limit evaluation and test reporting
• Dimensions: 235 × 105 × 300 mm
• Weight: approximately 5.2 kg

Typical Applications

• Conducted emission testing using the integrated 16 A LISN
• Radiated emission measurements with suitable antennas and Option 01
• Full-compliance EMC testing in certification and test laboratories
• EMC pre-compliance measurements during product development
• Electromagnetic interference diagnostics and troubleshooting
• EMC testing for industrial, commercial and military applications
• Measurements in anechoic chambers, GTEM cells and open-area test sites
• Production line quality assurance and EMC verification
• Discontinuous conducted disturbance analysis with the CA0010 Click Analyzer

Additional Information

The ER8000 is available in two frequency configurations. Option 00 covers 9 kHz to 30 MHz and is particularly suitable for conducted emission testing. Option 01 extends the frequency range to 3 GHz, allowing both conducted and radiated emission measurements.

The integrated 16 A LISN operates from 150 kHz to 30 MHz. Suitable external LISNs can be connected for other mains configurations or higher test currents.

The optional PMM CA0010 Click Analyzer extends the system with discontinuous disturbance measurement capabilities according to CISPR 14-1.

EMCO Elektronik provides technical consultation and support for selecting the appropriate ER8000 configuration, designing EMC measurement systems and integrating the receiver into existing test environments.