
New Low Phase Noise DRO Oscillators from Synergy Microwave
As modern 5G communication systems, advanced radar applications and high-frequency signal processing technologies continue to evolve, the requirements for RF signal sources are becoming increasingly demanding. In particular, low phase noise is essential when high spectral purity, precise frequency synthesis and complex modulation schemes are required.
RF and microwave specialist Synergy Microwave Corporation introduces a new generation of compact Dielectric Resonator Oscillators (DROs) with its Gold Standard Series. The series offers extremely low phase noise at fundamental frequencies of up to 20 GHz and is available in both surface-mount (SMD) and connectorized configurations.
GSDRO 1000-8XT: High Signal Quality for Demanding RF Systems
At the center of the new series is the GSDRO 1000-8XT, an oscillator developed for applications where low phase noise and high signal quality are critical requirements for the RF source.

According to Synergy Microwave, the model provides a particularly favorable relationship between phase noise performance and its Figure of Merit (FOM). It is therefore intended for developers of advanced radar and communication systems using complex modulation schemes and precision microwave signal sources.
Key features of the new DRO series include:
- Fundamental frequencies up to 20 GHz: Suitable for demanding RF and microwave applications.
- Very low phase noise: High spectral purity at both close-in and far-out frequency offsets.
- Compact configurations: Available in surface-mount (SMD) and connectorized versions.
- PLL integration: Suitable for phase-locked frequency synthesis systems.
- Versatile applications: Designed for communication systems, radar, DDS and scientific research.
Why Low Phase Noise Matters
Phase noise describes short-term random phase fluctuations in an oscillator signal. These fluctuations affect spectral purity and can limit the overall performance of an RF system.
In modern 5G communication systems, low phase noise can help meet the signal quality requirements of complex modulation schemes. Oscillator performance is particularly important in high-data-rate communication systems and demanding receiver architectures.
In radar systems, phase noise can make it more difficult to detect weak signals near strong reflections. A low phase noise RF source can therefore contribute to improved detection sensitivity.
Synergy Microwave's new DROs are designed to provide low phase noise at both close-in frequency offsets and larger offsets from the carrier.
PLL Synchronization with a 100 MHz Reference
One application example described in the product announcement is the integration of a 10 GHz DRO into a Phase-Locked Loop (PLL) synchronized to an external 100 MHz reference.

The PLL allows the microwave oscillator to be frequency- and phase-locked to a defined reference. The resulting phase noise depends on several factors, including reference signal quality, PLL architecture, loop bandwidth and the characteristics of the DRO itself.
The solution presented by Synergy Microwave demonstrates how low phase noise DROs can be integrated into frequency synthesis systems requiring high spectral purity.
Another application is their use as an internal microwave reference or clock source for Direct Digital Synthesis (DDS). The announced solutions are described for DDS applications with output frequencies of up to 6 GHz.
Typical Applications in Communications, Radar and Research
The Gold Standard Series addresses several application areas where low phase noise and stable RF signal sources are required:
- 5G communication systems: RF signal sources for frequency-synthesis-based transmitter and receiver architectures using complex modulation schemes.
- Radar technology: Low phase noise oscillators supporting high detection sensitivity.
- DDS systems: Microwave reference and clock signals for DDS applications with output frequencies up to 6 GHz.
- Scientific research: High-frequency signal sources for applications such as supporting beam stability in particle accelerators.
- RF and microwave development: Integration of low phase noise oscillators into frequency synthesis and signal processing systems.
Selecting and Integrating the Right DRO Solution
When selecting a DRO, engineers should consider not only the required output frequency but also phase noise at relevant frequency offsets, output power, frequency stability, supply requirements and mechanical integration constraints.
For PLL-based systems, the characteristics of the reference oscillator, loop bandwidth and DRO tuning behavior are additional important considerations.
The published information on the Gold Standard Series provides an overview of the technology and its applications. Detailed electrical and mechanical specifications for individual models should be verified using the corresponding manufacturer datasheets.
Synergy Microwave Solutions at EMCO Elektronik
EMCO Elektronik GmbH is the contact partner for Synergy Microwave Corporation products in Germany, Austria and Switzerland.
With its expertise in RF and microwave technology, EMCO Elektronik supports customers in selecting suitable components for communication systems, radar, scientific research and industrial RF applications.
Would you like to learn more about the Gold Standard Series DROs or the GSDRO 1000-8XT? Contact EMCO Elektronik to discuss your technical requirements and identify suitable solutions for your application.